 |
|
|
|
DEMAG DR technology & features Load Capacity up to 10 Ton |
|
|
|
GEARING - All gear stages have helical gearing and are case hardened for low noises and smooth running. Each gear and hub connection is designed with a conical bonded press-fit connection. This means high resistance to vibration and insensitivity against load peaks. Gear lubricant is synthetic and does not require replacement for the normal life of the hoist.
|
|
|
|
HOIST MOTORS - An optimised motor design for low-vibration, quiet operation 12/2-pole squirrel-cage motor with cylindrical rotor. All motors have Class F insulation and are protected from overheating by thermal protectors imbedded in the windings. Motors are totally enclosed, fan cooled (TEFC). Enclosure is outdoor rated IP 55 with a duty of 60% running time and 360 starts/hour.
|
|
|
| ROPE GUIDES - To assure positive winding of rope on the drum and to prevent rope overlapping and potentially dangerous groove peak contact, a hoisting rope guide is employed. Double wrapping of rope is not permitted. | |
|
|
FRAME DESIGN - The precision machined and welded steel trolley frame includes integrated side guide rollers, drops stops and lifting lugs for transport and installation. The flange width is easily adjusted and an under flange pressure rollers eliminates the need to counterbalance the trolley. The compact design allows for minimum hook approach dimensions. |
|
|
|
DIAGNOSTICS - The diagnostics tool will help eliminate un-necessary down time and remove the guessing game with maintenance requirements. The performance and safety status of your installation are kept under surveillance by the monitoring system. The LED display within the pendant control shows the operator or maintenance engineer the relevant status information and any unusual operating status, if applicable. Two way communication is possible via PC/PDA communication with hoist via IRDA (infrared) or through Laptop comport cables. |
|
|
|
|
